FEATURES OF CASSESE CS4008XL COMPUTERISED
PRODUCTION UNDERPINNER:
- High production capacity : Very fast! up to 3360
corners per hour (2 positions per corner)
- Computerised touch screen interface: Simple and user
friendly, informing the operator which wedges and accessories to
use for each profile.
- Up to 9 programmable wedge positions: with up to 9
wedges in each position.
- Barcode scanning capability: Built in networking
capabilities to read and set up barcodes. (Optional scanner &
software required)
- Wide joining capacity: 190mm stroke - for mouldings up to 150mm wide and 112mm high
- Ultra Powerful Double-action « push and tighten » rebate clamp: Position one of the moulding pieces up to the guide, then lay the second piece roughly place. The special action of the clamps draws them accurately and firmly together. Indeed, the clamps literally bite into the rebate of the 2 pieces of mouldings to pull and tighten them very strongly against each other. This ensures a high quality join every time, even on very wide mouldings. This is unique to Cassese.
- New retractable Ultra clamp system: Patented "Ultra" clamp system now retracts into table leaving a flat surface. Great for handling big frames!
- Patented adjustable fences: Adjusts for "less than perfect" 45° cuts and backs not 90° to bottom, in order to prevent gaps in the top or bottom of the join.
- Two stage pneumatic foot-pedal - allowing operator
to clamp and check the join, before inserting the wegde.
- New magnetic XL adjustable top clamp: Quickly adjust hold down height. Just change rubber end for hardwood or softwood. Now with quick-change magnetic hold-downs.
- Pneumatic cartridge loading
- No tools required to change wedge sizes: Uses only genuine Cassese patented cartridge wedges. They are colour coded with a full range of sizes available (5,7,10,12,&15) most available in hardwood and softwood versions. Quality and performance!
- No pressure adjustment required: when changing between softwood and hardwood timber.
- Minimum service required
|
 |
